Actron CP9190 manual Use UP or Down arrow key until Record Data is highlighted

Chrysler Diagnostics

Record Data

✓The Record Data function records vehicle PID data while the vehi- cle is parked or being driven. This function is mainly used for diag- nosing intermittent driveability problems that cannot be isolated by any other method.

✓The Scan Tool records data based on time (5 frames prior to the start of the recording, and for a duration after). The time after depends on the vehicle data rate.

✓The Record Data function allows diagnosis of an intermittent prob- lem by analyzing data leading up to the problem, during the prob- lem, and possibly after the problem, depending on duration.

From the Datastream Menu:

1.Select Record Data.

•Use UP or DOWN arrow key until Record Data is highlighted.

•Press ENTER.

Datastream Menu

View Data

Record Data Sensor Test Review Data Print Data Tool Setup

✓The Scan Tool can maintain only one recording at a time. Be sure to thoroughly review the old recording before erasing it.

✓If a recording currently exists in

memory, a message to Erase Old

7 Recording is displayed. The Scan Tool stores only one recording at a time, so be sure to review it before erasing it.

Record Data

Previous recording in memory. Do you want to erase it and make a new one?

<Yes>

<No>

•Next, turn the ignition key on. Engine can be off or running.

2.Refer to “Record Data” on page 4-9 of Global OBD II Diagnostics.

7 – 6 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •