Actron CP9190 manual Select Trigger Method, Recording. Trigger on Codes will

GM Historic (OBD I) Diagnostics

!! WARNING

Never operate the tool while driving. Have another person assist with the operation of the Scan Tool.

✓This function can be performed with KOEO or KOER.

2.Confirm selection.

•Press LEFT or RIGHT to move the brackets to the desired response.

• Press	ENTER.
✓ If a recording currently exists in
memory, a message to Erase Old		Record Data
Recording is displayed. The Scan
		Previous recording
Tool stores only one recording at
		in memory. Do you
a time, so be sure to review it		want to erase it and
before erasing it.		make a new one?

<Yes>

No

Multiple Group Vehicles
✓ Some vehicles display a Select Group screen for recording data.		5
In these cases, only one group of data can be recorded at a time.
Recording another group of data overwrites the present one.
3. Select Trigger Method.
•Use UP or DOWN arrow	Select Trig Method
key until desired trigger	￿ Manual Trigger
method is highlighted.	Trigger on Codes

•Manual Trigger begins recording when the ENTER key is pressed.

•Trigger on Codes begins recording when a diagnostic trouble code (DTC) is stored in the PCM.

•Select a method and press		ENTER.
✓ If Manual Trigger is selected,
press	ENTER to begin	Record Data
recording. Trigger on Codes will
not show this screen.		Ready to record
		Press ENTER
		to start recording.
		Press BACK
		to exit.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 5 – 5