Chrysler Diagnostics

Datastream Menu

IMPORTANT

All items marked with “-” are covered in section 3 or 4. These items are not covered in this section.

Datastream Menu

View Data

Record Data

Sensor Test

Review Data

Print Data

Tool Setup

View Data

The View Data function allows the user to view the vehicle param- eter identification (PID) data in real time. As the powertrain control module (PCM) monitors PIDs, they are simultaneously transmitted to the Scan Tool. The PIDs are continuously updated at the PCM’s rate.

In addition to reading codes, View Data is the most useful diag- nostic function for isolating the cause of a vehicle operation prob- lem. Viewing data is also used for observing sensor data and the on/off state of switches, solenoids, and relays.

View Data can be performed with the ignition key on-engine off (KOEO) or key on engine running (KOER).

7

!WARNING

Never operate the Scan Tool while driving. Have another person assist with the operation of the Scan Tool.

From the Datastream Menu:

1.Select View Data.

•Use UP or DOWN arrow key until View Data is highlighted.

•Press ENTER.

Datastream Menu

View Data Record Data Sensor Test Review Data Print Data Tool Setup

7 – 4 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Page 160
Image 160
Actron CP9190 manual Datastream Menu