Actron CP9190 manual Ready to Record

Ford Historic (OBD I) Diagnostics

✓If a recording currently exists in memory, a message to ERASE OLD RECORDING displays.

Record Data

Previous recording in memory. Do you want to erase it and make a new one?

<Yes>

No

✓The Scan Tool maintains only one recording at a time, so be sure to thoroughly review an old recording before erasing it. Power to store recordings is provided by the Scan Tool’s internal battery, thus, recordings are stored in memory only for the life of the battery.

✓Once the communication link has been established, you are ready to record data.

!CAUTION

Never operate the Scan Tool while driving. Have another person assist with the operation of the Scan Tool.

2.Start recording.

•Recording starts when the ENTER key is pressed.

✓The Scan Tool records for a varying time duration. The recording consists of 5 frames of data prior to the trigger point, and approximately 20 seconds after the recording. All applicable data parameters are recorded for the vehicle.

6

**Ready to Record**

Press ENTER any time to start recording.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 6 – 5