Using The Scan Tool

Program Mode

The Program Mode is used for reprogramming the Scan Tool with English, Spanish or French languages. The Scan Tool is programmed with English by default.

The Program Mode is also used for updating the Scan Tool. Instructions are provided with upgrades.

￿

System Setup

Beeper

Auto Power Off

Tool Information

Display Test

Keyboard Test

Memory Test

Program Mode

￿

￿

Connecting The Scan Tool

3

 

To diagnose a vehicle, connect the DLC and power adapter (if

 

applicable) to the Scan Tool. Refer to “Data Link Connector (DLC)” on

 

page 2-9 of Getting Started.

 

If you just want to power up the tool to do self-tests, code lookup, review

 

or printing data from the last vehicle tested, then you do not need to

 

attach the cable to the DLC. The internal battery provides power for this.

 

1.Connect appropriate cable to Scan

 

Tool

 

•Make sure pins are not bent.

 

Depending on vehicle, either the OBD II

 

Cable or Extension Cable is required.

 

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 17

Page 51
Image 51
Actron CP9190 manual Connecting The Scan Tool, Program Mode, of Getting Started, Connect appropriate cable to Scan Tool