Global OBD II Diagnostics

The manufacturer is responsible for determining the criteria to automatically stop test. Refer to appropriate vehicle service manual.

Vehicle Info

The Vehicle Info function allows the Scan Tool to request the vehicle’s VIN number, calibration ID(s) which identifies software version in vehicle control module(s), calibration verification numbers (CVN(s)) and in-use performance tracking.

Vehicle Info function applies to model year 2000 and newer OBD II compliant vehicles.

4 4

The Scan Tool cannot verify if data is correct for scanned vehicles.

CVNs are calculated values required by OBD II regulations.

The CVN calculation may take several minutes.

CVNs are reported to determine if emission-related calibrations have been changed. Multiple CVNs may be reported for a control module.

In-use performance tracking, tracks performance of key readiness Monitors.

From the Special Tests Menu:

1.Select Vehicle Info.

•Use UP or DOWN arrow key until Vehicle Info is highlighted.

•Press ENTER.

Special Tests Menu

I/M Readiness

Drive Cycle Monitor

State OBD Check

O2 Monitor Test

Diag Mon Tests

On-Board Systems

￿Vehicle Info

?

￿

4 – 34 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

Page 98
Image 98
Actron CP9190 manual Select Vehicle Info