Actron CP9190 manual From the Device Controls Menu Select Switch Test

Chrysler Diagnostics

Device Controls Menu

IMPORTANT

All items marked with “-” are covered in section 3 or 4. These items are not covered in this section.

❒Device Controls Menu

❒Switch Test

❒Actuator Test

❒Idle Speed Test

–Review Data

–Print Data

–Tool Setup

Switch Test

✓The Switch Test is used to test the operation of switches on var- ious Chrysler vehicle systems. These systems may include cruise control, A/C, braking, and the shift lever position.

✓Because of differences in vehicle designs, the Switch Test may not test the same switches in every car.

NOTE: Switch Test is only available on 1989-1995 Chrysler vehicles.

From the Device Controls Menu:

1.Select Switch Test.

•Use UP or DOWN arrow key until Switch Test is highlighted.

•Press ENTER.

2.Select switch to test. •Use the UP or DOWN arrow key.

•Press ENTER.

✓Switches for the engine and transmission are combined into one list when applicable.

Device Controls Menu

Switch Test Actuator Test

Idle Speed Test		7
Review Data
Print Data

Tool Setup

Select Sw to Test

A/C CLUTCH REL

A/C SWITCH SEN

A/C REQUEST

AIR SW SOL

ASD RELAY

BRAKE SWITCH

CHECK ENG LT

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 7 – 11