Actron CP9190 manual From Diagnostic Codes Menu Select Erase Codes

Global OBD II Diagnostics

Erase Codes

The Erase Codes function deletes DTCs and I/M Readiness data from vehicle’s control module(s). Perform this function with KOEO. Do not start the engine.

✓ The Erase Codes function may also erase View Freeze Data, O2

	Monitor Test, and Diagnostic Monitor Test results depending on
	vehicle.
	✓ The Erase Codes function sets monitors to inc.
	✓ Perform Erase Codes function only after systems have been
	checked completely and DTCs have been written down.
4 4	✓ After servicing the vehicle, erase stored DTCs and verify no codes
	have been reset. If a DTC returns, problem has not been fixed or other

faults are present.

✓ Depending on which monitor sets a code the vehicle may need to be driven and the monitor ran before concluding that the fault is repaired.

From Diagnostic Codes Menu:

1.Select Erase Codes.

•Use UP or DOWN arrow key until Erase Codes is highlighted.

•Press ENTER.

Diagnostic Codes Menu

Read Codes

Pending Codes

Erase Codes View Freeze Data Review Data Print Data Code Lookup

4 – 16 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •