Global OBD II Diagnostics

From the Special Tests Menu:

1.Select I/M Readiness.

•Use UP or DOWN arrow key until I/M Readiness is highlighted.

•Press ENTER.

Two types of I/M Readiness test are:

￿

Special Tests Menu

I/M Readiness

Drive Cycle Monitor

State OBD Check

O2 Monitor Test

Diag Mon Tests

On-Board Systems

Vehicle Info

?

￿

Since DTCs Cleared - shows status of the monitors since the DTCs were last erased.

This Drive Cycle - shows status of monitors since the start of the

current drive cycle. Refer to the vehicle service manual for more

detailed information on emission-related monitors and their

status.

 

 

 

 

 

4

Some vehicles do not support

 

 

 

 

 

 

 

 

This Drive Cycle. If vehicle

 

I/M Readiness Menu

 

supports both types of monitors

Since DTCs Cleared

the I/M Readiness Menu



This Drive Cycle

 

 

displays.

 

 

2.View Summary of Monitor Status.

•Use UP or DOWN arrow key (if required).

Depending on Readiness Test one of these 2 screens will be present

.

Since DTCs Cleared

Misfire Monitor

ok

Fuel System Mon

ok

Comp Component

ok

Catalyst Mon

inc

Htd Catalyst

n/a

Evap System Mon

ok

Sec Air System

ok

OR

This Drive Cycle

Misfire Monitor

ok

Fuel System Mon

ok

Comp Component

ok

Catalyst Mon

inc 

Htd Catalyst

n/a

Evap System Mon

ok

Sec Air System

ok

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 21

Page 85
Image 85
Actron CP9190 manual From the Special Tests Menu Select I/M Readiness, This Drive Cycle. If vehicle, I/M Readiness Menu