Actron CP9190 manual Record Data, Select Display Lines

Global OBD II Diagnostics

2.Select Display Lines.

•Use UP or DOWN arrow key.

•Press ENTER.

￿

Select Display Lines

1Line

2 Lines

3 Lines

4 Lines

5 Lines

6 Lines

7 Lines

￿

Changing Measurement Units

✓Refer to “Changing Measurement Units” on page 3-8 of Using The Scan Tool.

Record Data 4

✓The Record Data function records PIDs while vehicle is parked or being driven.

✓The Record Data function is mainly used for diagnosing intermittent driveability problems that cannot be isolated by any other method.

✓The recording time varies. A recording consists of frames of data prior to the trigger and several frames after the trigger.

✓Some vehicles wait a long period of time to store a trouble code after a driveability problem occurs. If the operator selected Trigger On Codes when making a recording, the operator might not see any drastic change in the data parameters before and after trigger point.

!CAUTION

Two people must be in vehicle when driving. One to drive and the other to operate the Scan Tool.

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 9