Global OBD II Diagnostics

Drive Cycle Monitor

The Drive Cycle Monitor function is very similar to the I/M Monitors though the Drive Cycle Monitor is used to view REAL TIME operations of the Emissions System on OBD II vehicles.

Drive Cycle Monitor continuously updates as the vehicle reports operations of the Emission System.

Refer to the vehicle service manual for the drive cycle operation.

During normal driving conditions, the vehicle computer scans the emission system. After a specific amount of drive time (each monitor has specific driving conditions and time requirements), the computer’s monitors will decide if the vehicle emissions system is

working correctly or not as well as detecting out a range of values.

4

When the monitor’s status is:

“ok” - vehicle has been driven enough for function.

“inc” (Incomplete) - vehicle was not driven enough to complete all of the monitors.

“n/a” (Not Applicable) - vehicle does not support that monitor.

Clear Monitors by:

Erasing Codes.

Vehicle Computer Module losing power (on some vehicles).

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 23

Page 87
Image 87
Actron CP9190 manual Drive Cycle Monitor, Clear Monitors by