Agilent Technologies 1100 Series manual Exchanging the Leak Sensor, When required

Models: 1100 Series

1 272
Download 272 pages 29.99 Kb
Page 152
Image 152

Repairing the Pump

Exchanging the Leak Sensor

 

Exchanging the Leak Sensor

 

 

When required

Leak messages without leak in the leak pan

Tools required

Screwdriver Pozidriv #1

 

Wrench 1/4 inch

 

Wrench 14 mm

 

Wrench 7 mm

 

Wrench 5 mm

Parts required

Leak sensor 5061-3356

 

 

1Switch off the pump at the main power switch, remove all cables and tubings, remove the pump from the stack.

2Remove the top covers and foam, see “Removing the Top Cover and Foam” on page 128.

3Remove pump assembly, fan, damper and the bottom foam, see “Exchanging the Power Supply” on page 147.

4Remove the main board, see “Exchanging the Low Pressure Pump Main Board (LPM Board)” on page 131.

5Unclip the leak pan and place it in front of the instrument.

6Pull the leak sensor out of the leak pan and push the leak sensor cable and connector through the metal plate.

7Push the connector of the new sensor through the metal plate.

8Place the leak sensor into the leak pan, see Figure 23 and clip the pan back into its position.

9Reinstall the bottom foam. Make sure that the leak sensor cable is not covered by the foam.

10Replace the main board, see “Exchanging the Low Pressure Pump Main Board (LPM Board)” on page 131.

11Install the pump assembly, the fan, the damper and the Z-panel, see

“Exchanging the Power Supply” on page 147. Reconnect all cables and capillaries.

12Replace top foam and top cover, see “Replacing the Top Cover and Foam” on page 156.

152

Page 152
Image 152
Agilent Technologies 1100 Series manual Exchanging the Leak Sensor, When required

1100 Series specifications

Agilent Technologies 1100 Series is a highly regarded lineup of high-performance liquid chromatography (HPLC) systems designed to meet the demanding needs of laboratories in various fields including pharmaceuticals, environmental testing, and food safety. Known for its versatility, reliability, and advanced technology, the 1100 Series has established itself as a benchmark for analytical performance.

One of the standout features of the Agilent 1100 Series is its modular architecture. This design allows users to configure the system according to specific analytical requirements. The components such as pumps, detectors, and autosamplers can be mixed and matched to create a tailored solution, ensuring maximum efficiency and optimal performance. This modularity also facilitates easy upgrades and maintenance, significantly extending the life cycle of the instrument.

At the heart of the 1100 Series is its advanced pumping technology. The system utilizes precise, high-pressure pumps that ensure a consistent flow rate and excellent reproducibility, essential for accurate quantification of analytes. The binary and quaternary pump options provide flexibility in method development, enabling users to perform gradient elution with ease.

The Agilent 1100 Series also boasts a range of detectors, including UV/VIS, fluorescence, and refractive index detectors. Each detector is designed to enhance sensitivity and specificity, enabling the detection of a wide array of compounds. The UV/VIS detector, in particular, is known for its reliable performance and user-friendly interface, which simplifies method setup and data analysis.

Another critical aspect of the 1100 Series is its autosampler. The system's autosamplers provide high throughput and automatic sample handling, which significantly reduces human error and increases productivity. The intelligent design allows for temperature control and reliable sample injection, ensuring optimal results.

In terms of software, the 1100 Series is supported by Agilent’s OpenLAB software, which offers an intuitive platform for method development, data acquisition, and analysis. This software integrates seamlessly with the HPLC hardware, making it easier for scientists to manage workflows and maintain compliance with regulatory requirements.

Overall, the Agilent Technologies 1100 Series represents a significant advancement in liquid chromatography, bringing together ideal characteristics such as modularity, precision, versatility, and sophistication. Its commitment to innovation and quality makes it a preferred choice for laboratories seeking reliable analytical solutions.