Programming Commands
Introduction
PROG:WAIT? query to indicate when the 70874C has paused. Then, retrieve
the response using the PROG:STR? query. Use PROG:STATe to continue pro-
gram execution. (Notice the lower case l etter e in PROG:STATe. This indicates
the this letter can be entered in either uppe r or lower case.)
The following example shows how to return the results of eye measureme nt.
Notice that the MEAS command does not use the Param variable.
OUTPUT Mta;"PROG:STR ’Command’,’MEAS’"
OUTPUT Mta;"PROG:WAIT?"
ENTER Mta;A$
OUTPUT Mta;"PROG:STR? ’Response’"
ENTER Mta;Response$
OUTPUT Mta;"PROG:STAT CONT"
ALIGN The ALIGN command string automatically aligns a mask to the eye.
Example OUTPUT Mta;"PROG:STR ’Command’,’ALIGN’"
OUTPUT Mta;"PROG:WAIT?"
ENTER Mta;A$
OUTPUT Mta;"PROG:STR? ’Response’"
ENTER Mta;Response$
OUTPUT Mta;"PROG:STAT CONT"
Values of Program Variables
Variable Data Type Value
Command string ALIGN
Param There are no parameters for this command.
Response string DONE