1-25
Getting Started
Steps for Setting Up Eye-Diagram Analysis
70841A/B appears.
cPress ADJUST ROW, and rotate the knob to move the box to the row where
the 70841A/B appears.
dPress ASSIGN BOTH.
4Use the displayed softkey menus to set the pattern generator to the desired
settings. For an example, refer to the paragraph "Configure th e d a ta signal" in
Chapter 2, “Application Tutorials”.
5To return control to the eye-diagram analyzer, press:
DISPLAY, NEXT INSTR
6To return to the eye-diagram analyzer personality menus, press:
USER
To Manually Set
the Trigger Level If a pattern generator other than the 70841A/B is used, you must u se the fol-
lowing procedure to manually set the trigger level.
1Select trace two and turn the display on by pressing:
> prev menu, select:, TR2, display ON/OFF ON
2Automatically scale the trigger trace and set the trigger level by pressing:
AUTO-SCALE, Trg,Cal, LEVEL
Use the knob to position the trigger level indi cator line so it crosses an edge.