2-25
Application Tutorials
Tutorial 7: Default and Custom Mask or Limit Line Testing
Stretch, Reduce, or Move the Mask
11 To stretch, reduce or move the mask by press:
prev menu, scale X|Y or offset X|Y
Add a Mask Margin
12 Press the left-side Masks softkey.
13 To automatically align the mask to a display ed signal, press:
MASK ALIGN
14 To add mask margins, press:
MASK MARGIN and enter the % of needed margin
msk mar ON|OFF ON, prev menu
Begin a Test
15 Display the Masks/Limits menu by pressing:
MENU, page 1 of 2, Analyze, masks, limits
16 Select the trace for testing by pressing:
trace:
17 If trace violations are to be counted as errors, press:
count TRC|DOT TRC
18 If measurement point violations are to be counted as errors, press:
count TRC|DOT DOT
19 To select when testing should stop, press:
end on:
20 If you want testing to stop after a set number of errors, press:
#errors ON|OFF ON desired number of errors
21 If you want testing to stop after a set number of traces, press:
#traces ON|OFF ON desired number of traces
22 To begin testing, press:
test ON|OFF ON