OPERATION
Tongue bending or binding | Improper Drawbar. |
in turns. |
|
BREAKING BLADE BOLTS | Operating with loose Blade Bolts. |
| Worn Blade Bolt. |
CUTTING TOO HIGH | Blades bent up. |
| Blade Carrier bent. |
| Blades on upside down. |
MOWER WINDROWING | Cutting heavy material. |
BROKEN CROSS OR | Load too high for joint. |
CUPS |
|
END GALLING OF | Speed too high during turns. |
CROSS AND CUPS |
|
NEEDLE ROLLERS | Load too high for joint. |
HAVE BRINELLED |
|
INTO CUP AND CROSS |
|
Add attaching Plate to all
Tighten Blade Bolts to 300 ft./lbs (Right Hand threads)
Replace Bolt.
Replace Blades.
Straighten or replace Blade Carrier. Turn Blades right side up and tighten.
Raise mower and reduce ground speed.
Use protective device with joint. Check joint angles and phasing. Slow down or raise Mower.
(See Clutch Maintenance)
Reduce PTO speed.
Check for small joint angles. Use protective device.
Check joint angles and phasing.
OPERATION
A96B 03/06 | Operation Section |
© 2006 Alamo Group Inc.
