ASSEMBLY
HYDRAULIC OR MANUAL LIFT - PULL & OFFSET TYPE
Attach the Spring Assembly option (Figure ASM-R-0111)to the lug on the mower deck behind the Center Gearbox. Retain using 1 x 2-3/4 bolt and locknut. Install the Hydraulic Cylinder (Figure ASM-R-0111)or the manual Ratchet Lift Screw 1"x 2-3/4” (Figure ASM-R-0112)between the Axle Center Lug and the Lug directly behind the Center Gearbox. Tighten all Bolts securely.
ASSEMBLY
HYDRAULIC OFFSET SEMI-MOUNT
Base unit is shipped assembled as shown except for cylinder and hoses. Remove shipping strap from frame and install hydraulic cylinder and hoses as shown in Figure ASM-R-0145. Route hoses on top of deck to provide easy access to tractor remote parts.
A96B 03/06 | Assembly Section 3-8 |
© 2006 Alamo Group Inc.
