ASSEMBLY

ASSEMBLY

Attach the Axle Arms to the Main Axle maintaining Dim. A approximately equal to Dim. B when clamp bolts are tighten. However, these Dim. may vary slightly if needed to help level the Mower Deck from side to side.

Note: Axle arms may be moved on the main tube to the desired wheel tread but it is always recommended that wheels be placed as wide as possible for stability. See

Figure ASM-R-0139.

CONTROL RODS - PULL TYPE

Attach the two level-lift control rods to the lower lugs on tongue and to lugs on the rear axle tube using pins, washers and cotter pins. Note: The adjusting nuts on control rods should be to rear of machine and should always be adjusted with equal tension on both rods. Figure ASM-R-0140 & ASM-R-0141.

A96B 03/06

Assembly Section 3-6

© 2006 Alamo Group Inc.

Page 90
Image 90
Alamo FC-0016, A96B, FC-0015, 00761808C manual Control Rods Pull Type, Figure ASM-R-0139