OPERATION
OPERATION
SHAFT OR TUBE TWISTED | Replace part and then slow down or | |
|
| or raise Mower. Use protective device. |
TUBE BROKEN IN WELDED | Replace part. | |
SEAM |
|
|
YOKE BROKEN AT | Replace part. | |
EAR TIP |
|
|
SLIP CLUTCH SLIPPING | Excessive load. | Reduce speed and/or raise cutter. |
EXCESSIVELY | Springs weak. | Replace Springs. |
| ||
| Improper adjustment. | |
| Too much power for | Reduce ground speed and |
| Slip Clutch. | material intake. |
| Friction Facings worn. | Replace Facings. |
| Oil on Facings. | Replace Facings. |
| Friction Facings glazed. | Clean with emery cloth. |
OIL BLOWING OUT | Flat bottomed Vent Plug | Replace with proper Vent Plug. |
VENT PLUG | or shallow cavity Plug. | Cavity in Oil Plug should be |
|
| approximately 5/8”. |
| Oil level too high. | Lower oil level to Plug. |
DRIVELINE INTEGRAL | Integral Shields deformed. | Replace Shield. |
SHIELDS RATTLING OR |
|
|
NOT TURNING FREELY | Nylon Bearing worn. | Replace Nylon Bearing. |
A96B 03/06 | Operation Section |
© 2006 Alamo Group Inc.
