Alamo A96B, FC-0015, FC-0016, 00761808C manual Tail Wheel Assembly Lift Type

ASSEMBLY

ASSEMBLY

TAIL WHEEL ASSEMBLY - LIFT TYPE

1.Attach Beam Support Weldments (2) to the Main Frame Assembly with 1/2” x 1-1/2” Bolts (6) & Locknuts(7). (Figure Asm-R-0135)

2.Slide the Beam Weldment (1) through Bracket (3) and attach to the Mower Lugs with 5/8” x 4" Bolt(4) and Locknut(5).

3.Remove Cotter Pin (8) and Washer (9) from Fork Pivot Shaft. Insert shaft into tube on end of Beam (1). Reinstall Washer (9) and Cotter Pin (8).

4.Install 1/2” x 1-3/4” Bolts (6) through Beam Support Weldment (2) and Bracket (3). (Install through pair of holes which will give approximate desired cutting height). Install Locknut (7).

A96B 03/06 Assembly Section 3-4

© 2006 Alamo Group Inc.