Alamo 00761808C, A96B, FC-0015, FC-0016 manual Mower Support ROD Offset Pull Model only

ASSEMBLY

MOWER SUPPORT ROD (OFFSET PULL MODEL ONLY)

Attach support stand (2) at the right front bolt welded in the frame main cross member. Insert long rod (1) through hole in top end of stand (2). See Figure ASM-R-0142. Attach long rod (1) to rear outside axle lug as shown in Figure ASM-R-0143. Assemble turnbuckle (3), jam nut (4), and short rod (5) as shown in Figure ASM-R-0144. Install flat end of short rod (5) at outer right chain guard mount bolt (6). Shorten turnbuckle to raise right side of mower level with left side.

A96B 03/06 Assembly Section 3-7

© 2006 Alamo Group Inc.

ASSEMBLY