MAINTENANCE
MAINTENANCE
Step VIII.
Check backlash between gear set. Backlash should be.012 to.024 inches. If backlash is to small add shims between main housing and input hub. Remove shims for excessive backlash.
Step IV.
Remove side caps one at a time, seal with sealer and reinstall. Repeat process for input hub assembly. Gearbox is ready to be filled with good grade of NLGI 000 Grease. See maintenance section for specifications.
ITEM | QUANTITY | DESCRIPTION |
1. | 2 | Seal |
2. | 2 | |
3. | 1 | |
4. | 1 | Spacer |
5. | 2 | Pipe Plug |
6. | 1 | Shaft |
7. | 1 | Housing |
8. | 4 | Bearing |
9. | 24 | Lock washer |
10. | 24 | Bolt |
11. | AR | Gaskets |
|
| (Includes 0.40, |
|
| 0.25, & 0.30) |
12. | 1 | |
13. | 1 | Adjusting Nut |
14. | 1 | Cotter Pin |
15. | 1 | Seal |
16. | 1 | Shaft |
17. | 1 | Gear - 17 Tooth |
18. | 1 | Pipe Plug Vented |
|
| (not illustrated) |
A96B 03/06 | Maintenance Section |
© 2006 Alamo Group Inc.