Alamo FC-0015, A96B, FC-0016, 00761808C manual Tongue Pull Type, Axle Assembly Pull Type

ASSEMBLY

The Components of these machines are quite heavy. Block all components up securely before working under or putting extremities under such parts.

TONGUE - PULL TYPE

Insert tongue lugs inside mainframe uprights and retain using Bushings 1-3/4OD X 1-1/4 LG & Hitch Pins. Insert Retaining Clip to Special Pins. See Figure ASM-R-0136.

AXLE ASSEMBLY - PULL TYPE

Attach the Rear Axle to the lugs on the rear of the Mainframe using (3) 3/4 x 3 bolts (#1) bushings 1-1/8OD x 1-1/16Lg (#2) and Locknuts (#3). See Figure ASM-R-0137.

AXLE ASSEMBLY (Semi-Mount & Hydraulic Offset) (Figure ASM-R-0138)

Attach rear axle (1) to lugs on rear of mainframe using 3/4” x 3" bolts (2), 1-1/8” OD x 1-1/16” bushings (3), 1" OD x 1" bushing (6) (in center), and Locknuts (4). Clamp caster wheel assembly (7) to axle w/ cap (8), using 5/ 8” x 2-1/2” bolts (9) and nuts (10). (Figure ASM-R-0138)

A96B 03/06 Assembly Section 3-5

© 2006 Alamo Group Inc.

ASSEMBLY