Alamo A96B, FC-0015, FC-0016, 00761808C manual Rear Deflector

ASSEMBLY

ASSEMBLY

FRONT AND REAR DEFLECTORS (Standard Equipment) and CHAIN GUARDS (Optional Equipment at additional cost)

Front and Rear rubber-fabric Deflectors are Standard Equipment and Front and Rear Chain Guards are optional at extra cost. One type of guards must be installed (and maintained in good repair) except for agricultural purposes only in areas where persons, vehicles, livestock, or other property will not be endangered by thrown objects and where such safety

equipment would prevent the mower's reasonable performance of its assigned agricultural task.

DEFLECTORS: Front and Rear Deflectors (Standard Equipment) are recommended for the average user and will provide protection from thrown objects with proper operation under normal conditions. Deflectors must be maintained in good repair or replaced after no more than two inches of wear off lower edge.

1.Attach the front rubber deflectors (1) to the Mower with bracket Straps (2), 1/2” x 1-1/4” Bolts (3), Flatwashers (4) and Locknuts (5).

Rear Deflector

2.Attach the rear rubber Deflectors (1) to the Mower with bracket Straps (2) using 1/2” x 1-1/4” Bolts (5), Flatwashers (4) and Locknuts (3). (Figure ASM-R-0151)

A96B 03/06 Assembly Section 3-12

© 2006 Alamo Group Inc.