Set Up Contacts and Relays
The System can monitor external contact closure events. Possible applications include:
•Magnetic contact switches
•Window foil
•Tamper switches
•Heat detectors
•Water sensors
•Pressure sensors
•Building smoke and fire detection systems
You can set input contacts to cause alarm conditions based on their current state and a
See the Installation Manual to connect contacts and relays to your Programmable Customer Input/Output Module (PCIOM).
Input contacts
Path: Main > Setup > System # > Input/Output > Input Contacts
Each Main Module supports up to 16
Name. Provide a unique name for each input contact.
Normal. Choose the normal state of the sensor. If the state changes, the controller takes the action defined by the Alarm Map setting.
Delay. Set how long the contact should be out of its normal state before the controller takes action (controlled by the Alarm Map setting).
NetworkAIR IR Operation, Maintenance, and Troubleshooting | 13 |