Operation: Respond to Alarms
Clear active alarms
Path: Main > Respond to Alarms > Clear Active Alarms
Clears all active alarms. If the conditions that caused the alarm still exist, those conditions cause the alarm to be regenerated.
•Clear System Alarms — Clear active alarms that apply to the Modules in this System.
•Clear Group Alarms — Clear active alarms that apply to the Group.
Reset sys failure
Path: Main > Respond to Alarms > Reset Sys Failure
Reset a System after a failure event has occurred. If the condition that caused the failure still exists, the System will fail again. A System will not restart after a failure until this command is executed.
A System must be reset only if it is part of a Group.
Note
NetworkAIR IR Operation, Maintenance, and Troubleshooting | 39 |