Manuals / American Power Conversion / Household Appliance / Air Conditioner

American Power Conversion Central Air Conditioning System manual Stop the System

Models: Central Air Conditioning System

1 84

Download 84 pages 23.05 Kb

Page 11

Operation: Using the Display

Stop the System

Path: Main Menu > On/Off

To stop the System, select the On/Off option on the main menu and change the setting to Off.

Change the setting to Off to shut down all modes of operation and the blower fan; the display and the controller continue to receive power.

Note For Systems with electric reheat, the blower fans may continue to operate for up to 60 seconds to purge heat from the System.

NetworkAIR IR Operation, Maintenance, and Troubleshooting

5

Image 11

American Power Conversion Central Air Conditioning System manual Stop the System

Contents

In-row Operation, Maintenance, and TroubleshootingNetworkAIR IR Precision Air Conditioner Page Operation ContentsPage Network Management Card Warranty MaintenanceTroubleshooting Function OperationDisplay Interface Scrolling status screens Using the DisplayNavigating the interface Operation Using the DisplayMain menu screen The Module has two levels of password protection Stop the System Set Up System Configuration Up Down Horizontal System Delays Baud Rate. The bus speed for the RS-485bus Fluid-CoilType Options for Fluid-CooledModulesApplicable Settings Operation Options for Fluid-CooledModules Valve TypesActuator Types Coil Fluid Temp Activation Threshold and Deadband Set Up Contacts and Relays Map. Choose alarms or events to map to this relay Page Alarm detectors Set Up Module ConfigurationConfigure Module Set Up Module Control Operation Set Up Module Control Reset variable frequency driveReset humidifier Set up HumidifierReset compressors How the modes work Control the EnvironmentCool 61.8-90.0F16.5 to 32.2C Cool 0.5-10.0F 0.28 -5.6C PID controls room load 1.Select the PID loop to tune Humidification sensitivity Set Up Alarms Blower Blower Heater Humidifier Set Up Group Range Group settingsSys failure events ModePage Set Up the Display To update the controller firmware 7.Restart the System Network config Set Up Network ConfigurationView Status Readings Manufacturer Name Model Number The name of the alarm Respond to Alarms Operation Respond to Alarms Clear active alarmsReset sys failure Action Required Alarm messages and suggested actionsDisplayed Alarm Message Action Required Displayed Alarm MessageAction Required Displayed Alarm MessageEnv Temperature Low Action Required Displayed Alarm MessageReset Humidifier Remote Sensor Added Displayed Alarm MessageAction Required Action Required Displayed Alarm MessageOperation Respond to Alarms Page Network Management Card Quick ConfigurationNetwork Management Card Quick Configuration TCP/IP configuration methodsAPC Device IP Configuration Wizard BOOTP & DHCP configurationSee “BOOTP” on this page or “DHCP” on page Configuration” in the User’s Guide 2. Use the configuration cable APC part 1.Choose Network from the Control Console menu 5.Press CTRL-C to exit to the Control Console menu Telnet/SSH How to Access a Configured UnitOverview Web interfaceSNMP FTP/SCP How to Recover From a Lost Password How to Upgrade Firmware 5. Upgrade the AOS. For example Page Monthly Preventive Maintenance MaintenanceVerify that the condensate line is flowing freely Quarterly Preventive Maintenance Dehumidification Functional testsVerify the following modes of operation Full cooling Full reheat HumidificationSemi-AnnualPreventive Maintenance Page Corrective Action TroubleshootingProblem Possible CauseAirflow too high ProblemPossible Cause Corrective ActionHumidifier ProblemPossible Cause Corrective ActionPage Limited Product Warranty for APC Products WarrantyExclusions Limited Product Warranty for APC ProductsAssignment of warranties Drawings, descriptionsPage Warranty Procedures Parts Warranty ProceduresPage Page 01/2005 APC Worldwide Customer Support990-2260-001 990-2260-001