AMX MVP-5200i manual Ppof, Ppog, Ppon

	Programming
Page Commands (Cont.)
PPOF	If the page name is empty, the current page is used (see example 2). If the popup page is
Deactivate a	part of a group, the whole group is deactivated. This command works in the same way as
	the ’Hide Popup’ command in TPDesign4.
specific popup
	Syntax:
page on either a
specified page or	"'PPOF-<popup page name>;<page name>'"
the current page.
	Variable:
	popup page name = 1 - 50 ASCII characters. Name of the popup page.
	page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
	Example:
	SEND_COMMAND Panel,"'PPOF-Popup1;Main'"
	Deactivates the popup page ’Popup1’ on the Main page.
	Example 2:
	SEND_COMMAND Panel,"'PPOF-Popup1'"
	Deactivates the popup page ’Popup1’ on the current page.
PPOG	If the page name is empty, the current page is used (see example 2). Toggling refers to the
Toggle a	activating/deactivating (On/Off) of a popup page. This command works in the same way
	as the ’Toggle Popup’ command in TPDesign4.
specific popup
	Syntax:
page on either a
specified page or	"'PPOG-<popup page name>;<page name>'"
the current page.
	Variable:
	popup page name = 1 - 50 ASCII characters. Name of the popup page.
	page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
	Example:
	SEND_COMMAND Panel,"'PPOG-Popup1;Main'"
	Toggles the popup page ’Popup1’ on the Main page from one state to another (On/Off).
	Example 2:
	SEND_COMMAND Panel,"'PPOG-Popup1'"
	Toggles the popup page ’Popup1’ on the current page from one state to another (On/Off).
PPON	If the page name is empty, the current page is used (see example 2). If the popup page is
Activate a	already On, do not re-draw it. This command works in the same way as the ’Show Popup’
	command in TPDesign4.
specific popup
	Syntax:
page to launch on
either a specified	"'PPON-<popup page name>;<page name>'"
page or the
	Variable:
current page.
	popup page name = 1 - 50 ASCII characters. Name of the popup page.
	page name = 1 - 50 ASCII characters. Name of the page the popup is displayed On.
	Example:
	SEND_COMMAND Panel,"'PPON-Popup1; Main'"
	Activates the popup page ’Popup1’ on the Main page.
	Example 2:
	SEND_COMMAND Panel,"'PPON-Popup1'"
	Activates the popup page ’Popup1’ on the current page.

MVP-5200i Modero Viewpoint Widescreen Touch Panel 109