AMX manual MVP-5200i Specifications FG5966-01, FG5966-02

Introduction

The MVP-5200i comes with an integrated rear "kickstand", allowing it to be used and displayed away from a Charging Station if necessary (FIG. 2). It also comes with a pre-installed 802.11g WPA/WPA2 SDIO wireless card.

Kickstand

DC power jack

Mini-USB port

FIG. 2 MVP-5200i side view (with kickstand)

MVP-5200i Specifications (FG5966-01, FG5966-02)

Dimensions:	4 3/4" x 7 9/16" x 13/16" (120.7 mm x 191.8 mm x 20.3 mm)
Weight:	• Panel: 1.4 lbs (0.64 kg)
Enclosure:	MVP-5200i-GB: High-gloss black plastic with brushed metal retaining ring.
	MVP-5200i-GW: High-gloss white plastic with brushed metal retaining ring.
Power Requirements	Panel with battery fully charged:
(Without Charging):	• Constant current draw: 0.3 A @ 12 VDC
	• Startup current draw: 0.4 A @ 12 VDC
Power Requirements	Panel while charging battery:
(While Charging):	• Constant current draw: 1.1 A @ 12 VDC
	• Startup current draw: 1.3 A @ 12 VDC
Minimum Power Supply	• PS3.0 Power Supply (FG423-30) - both 120 VAC and 240 VAC models are
Required:	shipped with this power supply
Power Modes:	• AWAKE: All necessary modules are powered up and device remains online
	with the Netlinx Master.
	• ASLEEP: Only the backlight will be turned off after the user selectable time of
	inactivity has elapsed. Panel resumes the ON mode in ~ 1 second.
	• STANDBY: Power to all components other than the touch screen is turned off
	after the user selectable time of inactivity has elapsed. Device will turn back
	on by touching the screen.
	• SHUTDOWN: Power to all peripherals and components is turned off. The
	system remains in this mode until it is rebooted.
Certifications:	• FCC Part 15 Class B and CE
	• CE
	• IEC60950
	• RoHS
	• Japan Approved
	• Lithium polymer microbattery: UN/IATA

2 MVP-5200i Modero Viewpoint Widescreen Touch Panel