AMX MVP-5200i manual WEP Passphrase Keyboard

Configuring Communication

8.Within the WEP Passphrase keyboard (FIG. 27), enter a character string or word (such as AMXPanel) and press Done when finished.

FIG. 27 WEP Passphrase Keyboard

For example, enter the word AMXPanel using a 128-bit hex digit encryption. After pressing Done, the on-screen Current Key field displays a long string of characters, separated by colons, which represents the encryption key equivalent to the word AMXPanel.

This series of hex digits (26 hex digits for a 128-bit encryption key) should be entered as the Current Key into both the WAP and onto other communicating Modero panels by using the WEP Key dialog (FIG. 28).

FIG. 28 WEP Key # Keyboard

9.Write down this Current Key string value for later entry into the WAP’s WEP Key field (typically entered without colons) and into other communicating panel’s Current Key field.

10.If entering a Current Key generated either by the target WAP or another Modero panel, within the WEP Keys section, touch the Key # button to launch the WEP Key # keyboard, enter the characters and press Done when finished.

This Key value corresponds to the Default WEP Key number used on the Wireless Access Point and selected in the Default Key field.

If the target Wireless Access Point does not support passphrase key generation and has previously been setup with a manually entered WEP KEY, that same WEP key must be manually entered on the panel.

11.The remaining Current Key and Authentication fields are greyed-out and cannot be altered by the user.

MVP-5200i Modero Viewpoint Widescreen Touch Panel 33