AMX MVP-5200i manual Sales Order, Purchase Order, AMX IR 38K Assigned, Port, AMX IR 455K Assigned

	Setup Pages
Project Information Page (Cont.)
Sales Order:	Displays the sales order information.
Purchase Order:	Displays the purchase order information.
AMX IR 38K Assigned	Displays the AMX 38 kHz IR channel port used by the IR Emitter on the panel.
Port:	• This information is specified in TPD4 (Project Properties > IR Emitters &
	Receivers tab).
	• For example, if you set the AMX IR 38K Port to 7 and then put a button on the
	panel with a channel code of 5 and a port of 7, it will trigger the IR code in slot 5
	of the AMX IR 38K Port.
AMX IR 455K Assigned	Displays the AMX 455 kHz IR channel port used by the IR Emitter on the panel.
Port:
IR User Def1 Port:	Displays the primary channel port used by the IR receiver on the panel.
IR User Def2 Port:	Displays the secondary channel port used by the IR receiver on the panel
Build Number:	Displays the build number information of the TPD4 software used to create the
	project file.
Creation Date:	Displays the project creation date.
Revision Date:	Displays the last revision date for the project.
Last Save Date:	Displays the last date the project was saved.
Blink Rate:	Displays the feedback blink rate, in 10-second increments.
Job Comments:	Displays any comments associated to the job (from the TPD4 project file).
Cradle Sensor Port:	Displays the port used by the charging cradle sensor.
Cradle Sensor Channel:	Displays the channel used to broadcast the charging cradle sensor status.

IR receivers and transmitters on G4 panels share the device address number of the panel.

MVP-5200i Modero Viewpoint Widescreen Touch Panel 55