AMX MVP-5200i Confirm and Upgrade the firmware via the USB port, Virtual NetLinx Master Settings

Upgrading Firmware

5.Click the Edit Settings button on the Communications Settings dialog to open the Virtual NetLinx Master Settings dialog (FIG. 82).

FIG. 82 Virtual NetLinx Master Settings

6.Within this dialog, enter the Master System number. The default is 1.

7.In the Available Connections section, click on the IP address for the touch panel to select it.

8.In the Virtual NetLinx Master Settings dialog box, click OK to close the box.

9.In the Communications Settings dialog box, click OK to close the box.

10.In the Master Communications Settings dialog box, click OK to save your settings and return to the main NetLinx Studio application.

11.Click the OnLine Tree tab in the Workspace window to view the devices on the Virtual System. The default System value is 1.

12.Right-click on the Empty Device Tree/System entry and select Refresh System to re-populate the list.

The panel will not appear as a device below the virtual system number, in the Online Tree tab, until both the system number used in step 14 for the Virtual NetLinx Master is entered into the Master Connection section of the System Settings page and the panel is restarted.

13.The OnLine Tree should now display the connection to the device. The Connection Status Icon on the device may take up to five seconds to register the connection.

Step 3: Confirm and Upgrade the firmware via the USB port

Use the CC-USB Type-A to Mini-B 5-wire programming cable to provide communication between the mini-USB Program port on the touch panel and the PC. This method of communication is used to transfer firmware Kit files and TPD4 touch panel files.

A mini-USB connection is only detected after it is installed onto an active panel.

1.Verify that the direct USB connection (Type-A on the panel to mini-USB on the panel) is configured properly, using the steps outlined in the previous two sections.

2.With the panel already configured for USB communication and the Virtual Master setup within NetLinx Studio, refresh the Online Tree pane.

MVP-5200i Modero Viewpoint Widescreen Touch Panel 97