AMX MVP-5200i manual System Recovery, Reboot/Shutdown Panel, Docking Station

Protected Setup Pages

Protected Setup Page (Cont.)

System Recovery:		• Reset System Settings - Deletes all of the current configuration parameters
		on the panel (including IP Addresses, Device Number assignments,
		Passwords, and other presets). This option invokes a Confirmation dialog,
		prompting you to confirm your selection before resetting the panel.
		• Remove User Pages - Removes all TPD4 touch panel pages currently on the
		panel, including the pre-installed AMX Demo pages. This option invokes a
		Confirmation dialog, prompting you to confirm your selection before removing
		the panel pages.
		Note that the YES button on the Confirmation dialog is disabled for 5 seconds
		as additional protection against accidentally resetting the panel or removing
		the panel pages.
Reboot/Shutdown Panel:		• Pressing the Reboot button causes the panel to reboot after saving any
		changes.
		• Pressing the Shutdown button causes the panel to shut down after saving
		any changes.
Docking Station		• Dock Status - Illuminates when the panel is docked and communicating with
		the Charging Station.
		• Undock Panel - Releases panel from Wall Mounted Charging Station.
Channel Code
Channel Port
	0.20

BUTTON

0,8 0,50

Level Port Channel Code

Address Port Address Code

FIG. 57 Function Show example

When the Function Show feature is displayed, the Channel Port and Code will appear in yellow, the Address Port and Code in green, and the Level Port and Channel Code in purple.

To reboot the panel:

1.Access the Protected Setup page.

2.Press the Reboot button.

3.Wait until the panel completes its reboot.

4.Log back into the Protected Setup page, if necessary. To shut down the panel:

1.Access the Protected Setup page.

2.Press the Shutdown button.

3.Disconnect any power source plugs or USB connections, if necessary.

62 MVP-5200i Modero Viewpoint Widescreen Touch Panel