AMX manual MVP-5200i Isn’t Appearing In The Online Tree Tab, MVP Can’t Obtain a Dhcp Address

Appendix C: Troubleshooting

The "Sensor" device in the Online Tree tab below the MVP panel should show v1.24 or higher after the upgrade, as shown in FIG. 95:

FIG. 95 "Sensor" device in the Online Tree tab

MVP-5200i Isn’t Appearing In The Online Tree Tab

1.Verify that the System number is the same on both the NetLinx Project Navigator window and the System Settings page on the device.

2.Verify the proper NetLinx Master IP and connection methods entered into the Master Connection section of the System Settings page.

MVP Can’t Obtain a DHCP Address

In requesting a DHCP Address, the DHCP Server can take up to a few minutes to provide the address.

1.Verify that the WAP is configured to match the MVP panel Network Name (SSID) field, Encryption, Default Key, and Current Key string.

Remember that the Passphrase generator on the panel does not produce the same

Current Key if using the same passphrase on the WAP.

2.In NetLinx Studio, select Diagnostics > Network Address and verify the System number.

3.If the IP Address field is still empty, give the device a few minutes to negotiate a DHCP Address and try again.

My WEP Doesn’t Seem To Be Working

WEP will not work unless the same default key is set on both the panel and the Wireless Access Point (WAP).

For example, if the access point was set to default WEP key 4 (which was 01:02:03:04:05), the Modero’s Default WEP key 4 must be set to 01:02:03:04:05.

NetLinx Studio Only Detects One Of My Connected Masters

Each Master is given a Device Address of 00000.

Only one Master can be assigned to a particular System number. If you want to work with multiple Masters, open different instances of NetLinx Studio and assign each Master its own System value.

Example: A site has an NXC-ME260/64 and an NI-4000. In order to work with both units. The ME260 can be assigned System #1 and the NI-4000 can then be assigned System #2 using two open sessions of NetLinx Studio v 2.x.

176 MVP-5200i Modero Viewpoint Widescreen Touch Panel