AMX MVP-5200i manual Fon, Gdi, Giv

Programming

"^" Button Commands (Cont.)

^FON

Set a font to a specific Font ID value for those buttons with a defined address range.

Font ID numbers are generated by the TPDesign4 programmers report. Syntax:

"'^FON-<vt addr range>,<button states range>,<font value>'"

Variable:

variable text address range = 1 - 4000.

button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state).

font value = range = 1 - XXX. Refer to the Default Font Styles and ID Numbers section on page 112.

Example:

SEND_COMMAND Panel,"'^FON-500.504&510.515,1&2,4'"

Sets the font size to font ID #4 for the On and Off states of buttons with the variable text range of 500-504 & 510-515.

The Font ID is generated by TPD4 and is located in TPD4 through the Main menu. Panel > Generate Programmer's Report >Text Only Format >Readme.txt.

"^" Button Commands (Cont.)

^GDI	Syntax:
Change the	"'^GDI-<vt addr range>,<bargraph drag increment>'"
bargraph drag	Variable:
increment.
	variable text address range = 1 - 4000.
	bargraph drag increment = The default drag increment is 256.
	Example:
	SEND_COMMAND Panel,"'^GDI-7,128'"
	Sets the bargraph with variable text 7 to a drag increment of 128.
^GIV	Parameters 1,2, and 3 will cause a bargraph or slider to be inverted regardless of
Invert the joystick	orientation. Their effect will be as described for joysticks.
axis to move the	Syntax:
origin to another	"'^GIV-<vt addr range>,<joystick axis to invert>'"
corner.
	Variable:
	variable text address range = 1 - 4000.
	joystick axis to invert = 0 - 3.
	0	1	0 = Normal
			1 = Invert horizontal axis
	2	3	2 = Invert vertical axis
			3 = Invert both axis locations

For a bargraph 1 = Invert, 0 = Non Invert

Example:

SEND_COMMAND Panel,"'^GIV-500,3'"

Inverts the joystick axis origin to the bottom right corner.

MVP-5200i Modero Viewpoint Widescreen Touch Panel 129