Arkon PRT03831-xxx manual Link your receiver to your transmitter, Are not

Section 14 133

Link and Unlink Your Transmitter and Receiver

Steps

3. Link your receiver to your transmitter.

Link08:30A

Searching For

Transmitter

Allow 70 Seconds

Cancel

Link08:30A

Transmitter ID: AAAF293-80359

located

Is this yours?

NoYes

Do This

a.Place the receiver within 10 feet of the transmitter.

b.Press the right Option button twice to display the Main menu.

c.Use the up or down Arrow button to highlight System.

d.Press the right Option button (Select) to display the System menu.

e.Use the up or down Arrow button to highlight Link.

f.Wait while the receiver searches for the transmitter.

Note: It may take the receiver up to 70 seconds to find the transmitter.

Result: The receiver displays the transmitter’s ID number.

	If the			And this	Then
	ID numbers			is your
	• Are the same.			➜	1. Press the right Option
					button (Yes).
					Result: The Main menu is
					displayed.
					2. Go to Step 4.
	• Are NOT			1st attempt	Press the Left Option button
	the same.				(No). The receiver will continue
Verify that the ID					to search for another transmitter
number displayed					in the vicinity.
on the screen is
the same as the				2nd attempt	Call Customer Care.
ID number on the
bottom of your
transmitter.		Caution: If you accept an incorrect transmitter ID when
		linking your Transmitter and Receiver, your glucose
		readings will be incorrect.
4. Check your work.			Result: A linked or unlinked transmitter and receiver. You
			have done this procedure correctly when:

oYour system is linked when you wanted it linked.

oYour system is unlinked when you wanted it unlinked.

oYou called Customer Care after your 2nd attempt to link failed.

oThe ID number of the transmitter displayed by the receiver (under the Transmitter Status menu item) matches the ID on the transmitter label.

END OF Section 14