Arkon PRT03831-xxx manual Reset User Settings, Access the System menu from the Main menu

15 Section 15

Reset User Settings

15 Reset User Settings

137

Purpose Start

To reset the user settings to the default values.

Do this procedure anytime you feel a need to return your settings to the factory defaults.

Materials Your FreeStyle Navigator Receiver.

Helpful Information

•If you don’t press any button within 12 seconds, the receiver screen will go blank and the last change will be lost if you haven’t pressed the Select button.

•Be careful to avoid making unintentional changes to the system settings and configuration.

•Resetting user settings resets the following items to their default. Note: The units of glucose cannot be changed. [The default values are shown in brackets]:

•High Glucose Target.

[180 mg/dL (10 mmol/L)]

•Low Glucose Target.

[80 mg/dL (4.4 mmol/L)]

•Alarm Settings: [Med Beep]

–On/Off

–Low beep

–Medium beep

–High beep

–Short vibe

–Medium vibe

–Long vibe

–Alarm Thresholds

•Country Settings: [Local settings]

–	Date format	– Language
–	Time format	– Decimal format

• Displays for the items in the Add Event menu:

–	Insulin type [Rapid]	– Exercise intensity [Medium]
–	Insulin dose [1 unit]	– State of Health [Normal]
– Exercise type [Walking]		– Generic Event [1]

– Exercise duration [30 min.]

• Strip Cal code. [18]	• Low Glucose Alarm.
• Sensor Code. [109]	[65 mg/dL (3.6 mmol/L)]
	• High Glucose Alarm.
	[300 mg/dL (16.7 mmol/L)]

Steps

1. Access the System menu from the Main menu.

Main		08:30A
	Glucose
	Alarms
	Reports
	System
	Add Event
		Select

Do This

a.Press the up or down Arrow button to highlight System.

b.Press the right Option button (Select) to go to the System Menu screen.

OVER