AT&T 8000 Requires more powcr than 450 MA, Then install the High Power Siren, Relay Module

If the auxiliary sounding device	Use the	following procedure:
requires more powcr than 450 MA,	1.	Peel off the tape backing.
then install the High Power Siren
Relay Module	2.	Mount anywhere on the inside of the Central controller
		plastic housing. Do not mount on a metal surface.
	3.	Connect the red and black wire leads to a UL-listed
		external power supply.
	4.	Connect the blue wire to the Central Controller screw
		terminal 7( +).
	5.	Connect the brown wire to the Central Controller screw
		terminal 10 (-).
	6.	While the auxiliary sounding device to the High Power
		Siren Relay Module screw terminals (-) and 2 (+).
	NOTE Look at the following diagram showing the High Power
	Siren Relay Module properly connected.

STEP 16	See Step 12 for instructions (p. 2-36).
Recheck All Transmitter Locations

AT&T Proprietary Information 2-41