Run optional auxiliary sounding device wires to the Wireless Siren/Controller

CAUTION: The Wireless Siren/Controller provides a total of 450

MA for auxiliary sounding devices. Do NOT exceed this total.

If an auxiliary sounding device(s) is being installed, connect the wires to the terminals labeled ‘ONE OR TWO EXTERNAL SIRENS”. Use the strain relief posts.

Install the auxiliary sounding device(s) according to the manufacturer’s instnrctions

Thread all wires through the plastic strain relief posts before connecting to screw terminals

Attach the power cord/antenna wire to

Use only a Comcode Number 8456837 12 VAC transformer.

the transformer

 

Plug in the transformer

Use a 120 VAC, 60 Hz, wall outlet. Secure the transformer with

 

the screw provided (#6-32).

Verify that the AC Power Light is ON

 

12VAC power in

AT&T Proprietary Information

2-73

Page 74
Image 74
AT&T 8000 Transformer Plug in the transformer, Screw provided #6-32, Verify that the AC Power Light is on