ATTO Technology SC 5700 operation manual Interface Options, Using the ExpressNAV Storage Manager

9.0 Interface Options

The best way to manage, monitor and configure the FastStream is to use the ExpressNAV Storage Manager, a browser-based application included with your FastStream, but you may use a terminal emulation program or Telnet.

Using the ExpressNAV Storage Manager

Use the ExpressNAV Storage Manager to manage, monitor and configure the unit. The choices you make lead you from screen to screen. Choices which are not available are greyed out.

Note

The FastStream is initially configured with DHCP enabled. It is best if you have access to a DHCP server.

1Work from the computer attached to the FastStream Ethernet port. From the CD supplied with your FastStream, run the QuickNav Utility QuickNAV-windows.exefor Windows or QuickNAV-Macfor Mac OS X.

2Locate the FastStream with the serial number recorded earlier.

3Highlight the serial number.

4Click Next.

If a DHCP server is available on your network, an address is assigned automatically by the server. Note the assigned address:

_____________________________________

If you do not have a DHCP server, get an IP address and subnet mask from your network administrator, type it into the area provided, and click on Next.

5Click on Launch Browser.

Your browser points to the ATTO ExpressNAV splash screen. Press Enter.

6Type in the user name and password values.

Note

The default values are user name: root and

password: Password. The user name is case insensitive and the password is case sensitive. It is best practice to change the user name and password. Refer to Changing current user name, password on page 19.

The pages which next appear depend on whether or not you have begun configuring the FastStream.

39

ATTO Technology Inc. FastStream SC RAID Controller Installation and Operation Manual