TailEventLog

Displays new events to the terminal. Type quit then press ENTER to exit tail mode.

TailEventLog

Temperature

Displays the current internal operating temperature of this unit in degrees Celsius.

get Temperature

Time

Controls or displays the current time as clocked by the unit in 24 hour format.

set Time [HH: MM: SS] get Time

TimeZone

Controls or displays the time zone or an offset from GMT for the unit.

Default: EST

set TimeZone [[EST CST MST PST] [+/-HH:MM]] SaveConfiguration command required

get TimeZone

Username

Specifies the user name. Username is case insensitive, 1 to 32 characters, and cannot contain spaces.

Default: root

set Username [username] SaveConfiguration command required get Username

VerboseMode

Controls the level of detail in CLI Help output and command response output for the current CLI session.

Default: enabled

set VerboseMode [enabled disabled] get VerboseMode

VirtualDriveInfo

Displays characteristics and statistics for all available virtual drives or any available virtual drive identified by its virtual drive ID.

VirtualDriveInfo <virtual drive ID>

Voltage

SC 5300, SC 5700

Displays the current voltage levels monitored by the unit.

VDDA = +3.3V

VDDB = +2.5V

VDDC = +1.5V

VDDD = +1.35V

get Voltage [VDDA VDDB VDDC VDDD all]

WrapEventLog

Controls EventLog output wrapping. When enabled, the unit logs up to 2048 event entries before overwriting the first entries. When disabled, the unit stops logging event entries at buffer full.

Default: enabled

set WrapEventLog [enabled disabled] SaveConfiguration command required get WrapEventLog

zModem

Uses the zMODEM protocol to transfer a file to or from the unit via the RS-232 port. The filename is required if the send option is specified.

zModem [send [filename] receive]

xviii

Page 65
Image 65
ATTO Technology SC 5700 TailEventLog, Temperature, TimeZone, Username, VerboseMode, VirtualDriveInfo, Voltage, ZModem