ATTO Technology SC 5700 operation manual Update Firmware, Click Upload

10.0 Update Firmware

Firmware updates are available on the ATTO website. Contact your ATTO sales representative for complete information.

The ATTO FastStream has several processors which control the flow of data. The firmware to control these processors can be upgraded in the field using the ExpressNAV Storage Manager.

Be sure all data is backed up before updating firmware to prevent data loss.

CAUTION

Ensure that all I/O to the ATTO FastStream has stopped. During this procedure, do not interrupt the flash process.

1The ATTO FastStream firmware is distributed as an image file (.ima). Download the appropriate firmware file from the ATTO website or insert the Installation CD containing the file into your computer.

2If you are not already in the ExpressNAV Storage Manager, type the IP address of your appliance in a standard browser. On the splash screen, click Enter Here. In the box provided, type in your user name and password, and click OK.

3The Health and Status Monitor page appears.

4Click on the Diagnostics button on the left hand side of the ExpressNAV Storage Manager.

5The Diagnostics Menu page appears. From the Select User Process box, select Update the Firmware.

6Click Next.

7If you know the name and location of the .ima file, enter it into the text box provided. If you do not know the file name and location, click on Browse to navigate to the new firmware and click on it until the filename appears in the text box.

8Click Upload.

CAUTION

Do not power down the host or the ATTO FastStream. Interrupting the flash process makes your FastStream inoperable and you must return it to ATTO for repair.

9Wait for a success message to be displayed.

10Click on Restart.

11 When the Diagnostics Menu page appears your new firmware has been uploaded and installed.

41

ATTO Technology Inc. FastStream SC Installation and Operation Manual