To place all participants on hold
1.Press the Hold (
) button.
The display shows an associated HELD softkey on the right side of the display.
2.To 
) button again or press any HELD softkey on the right side of the display.
To end the conference call
1.Select the line that corresponds to either of the connected parties.
2.Select the Drop softkey.
3.Perform one of the following actions:
●hang up the handset.
●press the Speaker (
) button.
●press the Headset (
) button.
Call Forwarding
By default, calls are forwarded to your voicemail after three rings. Call forwarding lets you specify rules for handling your incoming calls. You can forward calls to:
●the voicemail on your telephone
●an extension number listed in the Corporate directory or your Personal directory
●a telephone number that you specify (for example, an outside line)
Note:
If your network has a G10 PSTN gateway and you forward an incoming outside call to a PSTN number, the call will use two PSTN lines while the call is active.
To forward all calls to voicemail
1.Select the CFwd softkey.
2.Select All Calls on the Call Forwarding menu.
3.Select the Chg softkey.
4.Select Voicemail on the Fwd All Calls To menu.
5.Select the Save softkey.
6.Select the Exit softkey to display the previous menu, or press the Phone/Exit (
) button.
To forward unanswered calls to voicemail
Follow this procedure to enable the feature after it has been disabled.
16 Avaya | November 2006 |
