Avaya 518-456-804 manual Labeling Jacks

2 Installing Your System Quick Reference Guide

Labeling Jacks

After you have mounted the control unit on the wall, you must label the line and extension jacks. The line jacks are on the top of the modules, and the extension jacks on the bottom.

Follow these steps to label the line and extension jacks:

1Label the line jacks on the processor module, beginning with “1” at the top line jack.

2Do one of the following:

•For a 2-slot carrier, label the line jacks on the other module.

•For a 5-slot carrier, label the line jacks on the other modules by starting with the leftmost module and ending with the rightmost module.

•Although a T1 module has only one line jack, it supports up to 16 lines. Therefore, the line jacks on the module to the right of a T1 module in a 5-slot carrier are numbered starting with “22.”

•Although a 1600 DSL module has only one line jack, it supports up to 16 lines. Therefore, the line jacks on the module to the right of a 1600 DSL module in a 5-slot carrier are numbered starting with “22.”

3Label the extension jacks on the processor module, beginning with “10” at the topmost extension jack.

4Do one of the following:

•For a 2-slot carrier, label the extension jacks on the other module.

•For a 5-slot carrier, label the extension jacks on the other modules by starting with the leftmost module and ending with the rightmost module.

18 Installing the Control Unit