6 Maintaining Your System | Quick Reference Guide | |
|
|
|
Backup Programming—Manual (#124)
Use this feature to manually back up all the programming (except the system date and time) to either the internal memory of the processor module or a Backup/Restore PC Card.
To begin a manual backup of system settings:
1If you want to back up to a PC Card, verify that only one Backup/Restore Card is in the processor module.
2Press f00ss#124at extension 10 or 11.
The current setting appears.
3To change the setting, press Dor duntil the setting you want appears, or press rto return to the factory setting. The possible settings are:
•1 = Internal Memory
•2 = PC Card
If there is a problem, a message appears (see Chapter 7, “If Something Doesn’t Work” for explanations and corrective actions).
If there is no problem, press eto begin the backup.
4Press e.
A status message is displayed indicating that a backup is in progress, and within 30 seconds, a message appears indicating the result.
If the backup failed, an error message appears (see Chapter 7, “If Something Doesn’t Work,” for explanations and corrective actions).
•Backup Failed:Check Card
•Backup Failed:SystemBusy
•Backup Failed:Insert Valid Card
5Exit programming mode.
66 Backup and Restore
