Avaya 518-456-804 manual Using a PC Card

6 Maintaining Your System Quick Reference Guide

Using a PC Card

Follow these steps to upgrade your system’s software with a PC card:

CAUTION:

Before starting, verify that you have batteries installed in the processor module by viewing the display of the telephone at extension 10.

1If you have a 5-slot carrier, move the carrier’s On/Off switch to the “Off” position (“O”).

2For all types of installations, disconnect the power cord from the wall outlet.

3If you do not have a 5-slot carrier, go to Step 4. If you have a 5-slot carrier:

aLoosen the thumb screw at the bottom of the carrier cover.

bRotate the carrier cover to disengage the tabs at the top of the modules from the openings on the top of the carrier cover.

CAUTION:

Remove all other PC Cards from the processor before initiating an upgrade.

4To insert the PC Card, hold it with the label facing to the right, and slide it gently into either PC Card slot on the processor module. When inserted properly, the PC Card projects about 1-5/8 inch (4 cm) from the module.

70 Using a PC Card