3 Setting Up Your System | Quick Reference Guide | |
|
|
|
3Select another procedure, or exit programming mode.
Automatic Daylight/Standard Times (#126)
This feature is turned on by default and automatically updates the system clock for annual Daylight Savings Time and Standard Time changes. If you are in an area that does not have daylight savings time, use the procedure below to turn off this feature.
To change the status of Automatic Daylight/Standard Time:
1Press f00ss#126at extension 10 or 11.
2Press Duntil the appropriate value appears:
•1 = Active (the factory setting)
•2 = Not Active
3Select another procedure, or exit programming mode.
Administering the Loudspeaker Paging System
Use the feature Loudspeaker Paging Line (#617) to specify the line jack to which you connected the loudspeaker paging system. Refer to the PARTNER Advanced Communications System Installation, Programming, and Use guide for more detail.
38 Administering the Loudspeaker Paging System
