Avaya S8700 manual Postinstallation administration

		Contents
IPSI address configuration		57
Programming the IPSI for static addressing	. . . . . . . . . . . . . . . . .	58
Setting the VLAN and diffserv parameters		61
Programming the IPSI for DHCP addressing		62
Verifying connectivity to the server		65
Verifying that the IPSIs are translated		65
Upgrading the IPSI firmware version (if necessary)		65
Enabling control of the IPSIs		65
Verifying the license status		66
Chapter 7: Postinstallation administration		67
Verifying translations		67
Setting rules for daylight savings time		68
Setting locations (if necessary)		69
Verifying the date and the time (main server only)		70
Clearing and resolving alarms		71
Enabling and disabling the Ethernet switch ports		71
Enabling alarms to INADS by way of a modem		72
Enabling alarms to INADS by way of the SNMP module		73
Backing up files to the compact flash media		73
Before leaving the site		74
Chapter 8: Installation verification		75
Testing the IPSI circuit pack		75
Testing the license file		75
S8730 LEDs		76
S8710 and S8720 LEDs		77
Additional server LED information		79
Avaya C360 Ethernet switch LEDs		80
UPS LEDs		81
TN2312BP IPSI LEDs		82
Appendix A: Server access		87
Accessing the command line interface of the server with SSH		87
Connecting to the server directly		89
Connecting to the server remotely over the network		92
Connecting to the server remotely over a modem		92

Installing and Configuring the Avaya S8700-Series Server January 2008 5