Avaya S8700 manual Figure notes

About server port connections

Figure 1: Duplication and control network cabling for hardware duplication (S8730)

4

5

RECEIVE MODE TRANS MODE LINC SYNC LINC ACTIVE DAL1 DUP MEMORY

4

2

3
5	1
PCIe 2	PCIe 1

1

5

RECEIVE MODE TRANS MODE LINC SYNC LINC ACTIVE DAL1 DUP MEMORY

4

2

3

1

PCIe 2 PCIe 1

2

ILO 2 UID

1

ILO 2 UID

2

3

hw8730h2 LAO 082807

Figure notes:

1.Eth0 — CNA (also LAN for nondedicated control network)

2.Eth2 — Server duplication link - duplication crossover cable

3.Eth3 — To an Ethernet switch and/or the corporate LAN for control network B (CNB)

4.Eth4 — To the customer LAN if the control networks are dedicated

5.Fiber duplication cable

Note:

These are typical Ethernet port assignments. The customer might specify different assignments for Eth0, Eth2, Eth3, and Eth4.

Installing and Configuring the Avaya S8700-Series Server January 2008 15