Enabling the IPSI
Enabling the IPSI
1.Type change
2.On a duplicated server, the system displays the following screen. Verify that the primary control and the secondary control subnetwork addresses are correct.
change | Page 1 of 1 |
IP SERVER INTERFACE (IPSI) SYSTEM PARAMETERS |
|
SERVER INFORMATION |
|
IPSI Host Name Prefix: birch |
|
Primary Control Subnet Address: 198.152.254. 0 * |
|
Secondary Control Subnet Address: 198.152.255. 0 * |
|
OPTIONS |
|
Switch Identifier: A |
|
IPSI Control of Port Networks: enabled |
|
The control subnetwork addresses typically match the most significant three octets of the IP addresses of the server for the media gateway. The most significant three octets are the first three groups of digits in the IP address. Select the configure server command on the Maintenance Web Interface to see the IP address of the server.
An asterisk (*) to the right of the Control Subnet Address field means that Communication Manager does not have the subnetwork information and the subnetwork address displayed is incorrect.
3.If the information in the Primary Control Subnet Address field, the Secondary Control Subnet Address field, or both fields is incorrect, use the Maintenance Web Interface to change the server configuration to match the Server IP address in configure server. Under Server Configuration and Upgrades, click Configure Server to change the server configuration. Then return to this procedure.
4.Set the Switch Identifier field to the switch ID letter. Acceptable switch ID letters are A through J. A is the default setting.
5.Set the IPSI Control of Port Networks field to enabled.
6.Press Enter to save the changes.
Installing and Configuring the Avaya | January 2008 53 |
